Phynix 11020 Paint Thickness Gauge PaintCheck plus FN Description : Paint thickness gauge for ferrous and non ferrous metals Base material iron/steel and non-ferrous metals Measuring range iron/steel 0 - 3.000 µm Base material Iron/steel and non-f

Product code: 11020

Phynix 11020 Paint Thickness Gauge PaintCheck plus FN Description : Paint thickness gauge for ferrous and non ferrous metals Base material iron/steel and non-ferrous metals Measuring range iron/steel 0 - 3.000 µm Base material Iron/steel and non-f

Product code: 11020
£425.00

Details

Details

Country of Manufacture Germany
Manufacturer Phynix
Measureing range iron/steel 0 -3.000 µm
Base material iron/steel and non-ferrous metals
Accuracy ± (3 µm + 5 % of value)
Resolution 0-1.000 µm: 1 µm / 1.000 - 2.500 µm: 2 µm
Calibration Not neccessary: Factory calibration
Display 4-digit alphanumeric, height 8 mm
Operating temperature 0° C to + 60 °C
Surface temperature -15 °C to + 60 °C
Dimensions (gauge) 110 mm x 50 mm x 25 mm
Weight 90 g incl. batteries
Protection class IP 52 (protection against dust and dripping water)
Standards DIN, ISO, ASTM, BS
Recommended application Paint thickness measurement
Warranty 2 years

Description

Details

PaintCheck plus FN is an easy to use paint thickness measurement gauge providing fast, non-destructive and accurate coating thickness measurements on steel and non-ferrous metals e.g. aluminum. The thickness of the coating layer provides information about the coating structure, repaintings and fillings. If the measured coating thickness exceeds the standard thickness or if the measurements vary, the use of filler material for repair work or repaintings is indicated.

Accident damages can easily be detected with PaintCheck plus FN.

PaintCheck plus FN provides two established methods of coating thickness measurement: the magnetic inductive and the eddy current method (DIN EN ISO 2178 und 2360). Both practices offer the highest degree of accuracy on thin coatings on steel, as well as on non-ferrous metals e.g. aluminum. The selection of the practice is made automatically when applying the probe. It is as fast, easy and universal as it gets.

 

Application areas

  • Car dealerships
  • Second-hand car dealerships
  • Paint shops
  • Surveyors
  • Oldtimer scene
 

Advantages at a glance

  • Easy single button handling - switch on and measure!
  • Fast and precise measurements
  • Measurements on flat and slighty curvatured surfaces
  • Calibration-free measurements
  • For measurements on iron/steel and non-ferrous metals
  • Automatic recognition of the substrate
  • Integrated probe for measurements on smooth, painted surfaces
  • 4-digit alphanumeric display
  • Large contact surface for safe positioning
  • Acoustic signal after measurement 
  • Selectable µm/mils
  • Automatic switch off function
 

Technical specifications PaintCheck plus FN – 11020

Design Integrated probe
Measuring range iron/steel 0 - 3.000 µm
Base material Iron/steel and non-ferrous metals
Accuracy ± (3 µm + 5 % of value)
Resolution 0-1.000 µm: 1 µm / 1.000 - 2.500 µm: 2 µm / 
2.500 - 3.000 µm: 5 µm
Calibration Not neccessary: factory calibrated
Display 4-digit alphanumeric, height 8 mm
Operating temperature 0° C to + 60 °C
Surface temperature -15 °C to + 60 °C
Dimensions (probe) 110 mm x 50 mm x 25 mm
Weight 90 g incl. batteries
Protection class IP 52 (protection against dust and dripping water)
Standards DIN, ISO, ASTM, BS
Recommended application Paint thickness measurement
Warranty 2 years
 

Limit values

Smallest curvature radius for convex surfaces 25 mm
Smallest curvature radius for concave surfaces 50 mm
Smallest operation height 125 mm
Smallest measurement area 40 x40 mm
Smallest base material thickness – F 0.75 mm
Smallest base material thickness – N 0.25 mm
 

Scope of delivery

Gauge PaintCheck plus FN 
Protective rubber cover
Control foil
Steel zero-standard 
Aluminum zero-standard
Carrying case 
2 batteries AAA
Instruction manual