Bowers MXTA4M Bowers Mechanical 3 Point Micrometers Range : 4-5mm Depth : 12mm Graduation : .001mm Accuracy : .004mm Setting Ring : 4mm
Item number:
MXTA4M
| Select Micrometer Type | 2 Point Analogue |
|---|---|
| Type of Micrometer | 2 Point Steel anvils Ratchet operated |
| Digital, Non-Digital | Non Digital |
| Micrometer Range | 4-5mm |
| Measurement units | Metric |
| Graduation | .001mm |
| video |
Bowers MXTA4M Bowers Mechanical 3 Point Micrometers Range : 4-5mm Depth : 12mm Graduation : .001mm Accuracy : .004mm Setting Ring : 4mm
Item number
MXTA4M
£580.00
ex vat
£580.00
ex vat
Bowers XT Non-digital Bore Gauges are an economical solution to accurate shop-floor bore measurement.
The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2 – 300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification.
Features
Range 2 - 300mm (0.080” – 12”)
2 - 6mm 2 point/ 6 - 300mm 3 point measurement
Graduation 2 - 6mm: 0.001mm, 6 - 300mm: 0.005mm
Tungsten carbide measuring faces on all 3-point heads from 12.5mm
Blind bore measurement from 2mm - 6mm and above 12.5mm (0.500")
Extensions available above 6mm for deep hole measurement
Ratchet stop to ensure consistent measurement
Setting rings included with individual instruments and sets
UKAS certificates supplied as standard with all setting rings
UKAS certificate supplied as standard with all XT mechanical micrometers
Serial number on all gauges
Bore gauges manufactured according to DIN 863, part 4
Supplied in fitted wooden case
The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2 – 300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification.
Features
Range 2 - 300mm (0.080” – 12”)
2 - 6mm 2 point/ 6 - 300mm 3 point measurement
Graduation 2 - 6mm: 0.001mm, 6 - 300mm: 0.005mm
Tungsten carbide measuring faces on all 3-point heads from 12.5mm
Blind bore measurement from 2mm - 6mm and above 12.5mm (0.500")
Extensions available above 6mm for deep hole measurement
Ratchet stop to ensure consistent measurement
Setting rings included with individual instruments and sets
UKAS certificates supplied as standard with all setting rings
UKAS certificate supplied as standard with all XT mechanical micrometers
Serial number on all gauges
Bore gauges manufactured according to DIN 863, part 4
Supplied in fitted wooden case
Bowers XTA3M Bowers Mechanical 3 Point Micrometers Range : 3-4mm
