Renishaw A-1025-0050 CMM Probes Description:PH10M motorised indexing probe head kits for use with M8 threaded touch-trigger probes and extension bars.
Item number:
A-1025-0050
| video | |
|---|---|
| Additional Details | Length =117 mm| Width =62 mm| Weight =645 g| Probe Mounting =Autojoint (multiwire)| Head Mounting =PH10M shank to suit CMM| Suitable Controller =PHC10-2| Repeatability of position =0.5µm (0.00002") specified at a distance of 62 mm| Total no. of positions =720| Max recommended drive torque =0.45 Nm| Maximum extension bar =300 mm (11.8") using PAA3 extension| |
Renishaw A-1025-0050 CMM Probes Description:PH10M motorised indexing probe head kits for use with M8 threaded touch-trigger probes and extension bars.
Item number
A-1025-0050
CMM Probes
High torque means the PH10M is capable of carrying 300mm extension bars
-Can be used with optical scanning and touch trigger sensors on a single CMM
-Highly repeatable kinematic auto-joint allows for probe or extension bar changing without re-qualification
-Uses the TP20 probing system with the latest range of styli
-Multiwire capability
-720 Repeatable Positions
The PH10M motorized probe head has been developed for the new generation of contact and non-contact scanning probes. It has three times the torque of PH10T, allowing probe extention bards up to 300mm long to be used.
The PH10M can carry long extension bars and complex probes such as SP600M or TP7M. The highly repeatable autojoint allows rapid probe or extension bar changing without the need for re-qualification.
High torque means the PH10M is capable of carrying 300mm extension bars
-Can be used with optical scanning and touch trigger sensors on a single CMM
-Highly repeatable kinematic auto-joint allows for probe or extension bar changing without re-qualification
-Uses the TP20 probing system with the latest range of styli
-Multiwire capability
-720 Repeatable Positions
The PH10M motorized probe head has been developed for the new generation of contact and non-contact scanning probes. It has three times the torque of PH10T, allowing probe extention bards up to 300mm long to be used.
The PH10M can carry long extension bars and complex probes such as SP600M or TP7M. The highly repeatable autojoint allows rapid probe or extension bar changing without the need for re-qualification.
Renishaw A-1025-0050 CMM Probes Description:PH10M motorised indexing probe head kits for use with M8 threaded touch-trigger probes and extension bars.
