Mitutoyo Surface Roughness EXTRA Small Hole Detector - Low Force
The Standard Detector for the Mitutoyo Surface Roughness Tester models SJ-210 & SJ-310 has a measuring tip that is about 6mm overall height.
To be able to measure the surface roughness of a small hole that has a minimum diameter of 2.8mm, Mitutoyo recommends using the Small Hole Detector for the Mitutoyo Surtest models SJ-210 & SJ-310.
The Mitutoyo Surface Roughness Tester models SJ-210 & SJ-310 are both available in 2 different models, the Standard Force model and the Low Force model.
- The Standard Force model uses 4 mN measuring force during the measurement.
- The Low Force model uses 0.75 mN measuring force during the measurement.
This Extra Small Hole Detector is designed to be used with the Low Force models of the SJ-210 & SJ310.
Features include...
- Small Hole Detector for Mitutoyo Surftest Models...
- SJ-210
- SJ-310
- 0.75mN Measuring Force
- Stylus Profile: 2umR Tip Radius
- 60° Tip Angle
- 2.8mm Minimum Measurable Hole Diameter
No technical information is currently available.
No application information is currently available.
Why Buy From MQS?
Over 40 years supplying precision measuring equipment throughout the UK and Ireland.
Expert Advice
Experienced engineers helping you select the correct measuring solution.
UKAS Calibration
Full UKAS accredited calibration laboratory with nationwide support.
Installation & Training
Installation, commissioning and operator training available.
After Sales Support
Technical support, servicing, repairs and ongoing customer care.