Mitutoyo Surface Roughness Low Force Deep Groove Detector
The Standard Detector for the Mitutoyo Surface Roughness Tester models SJ-210 & SJ-310 has a measuring tip that is about 2.4mm tall.
To be able to measure the surface roughness of a groove that is taller than 2.4mm, Mitutoyo recommends using the Deep Groove Detector for the Mitutoyo Surtest models SJ-210 & SJ-310.
The Mitutoyo Surface Roughness Tester models SJ-210 & SJ-310 are both available in 2 different models, the Standard Force model and the Low Force model.
- The Standard Force model uses 4 mN measuring force during the measurement.
- The Low Force model uses 0.75 mN measuring force during the measurement.
This Deep Groove Detector is designed to be used with the Low Force models of the SJ-210 & SJ310. It has a measuring tip that is only 2mm wide and 10mm tall, allowing you to measure the surface roughness of deep and skinny grooves.
Features include...
- Deep Groove Detector for Mitutoyo Surftest Models...
- SJ-210
- SJ-310
- 0.75mN Measuring Force
- Stylus Profile: 2?¬mR
- 60° Tip Angle
- 0.39" / 10mm Deep Stylus
- 0.08" / 2mm Wide Stylus
No technical information is currently available.
No application information is currently available.
Why Buy From MQS?
Over 40 years supplying precision measuring equipment throughout the UK and Ireland.
Expert Advice
Experienced engineers helping you select the correct measuring solution.
UKAS Calibration
Full UKAS accredited calibration laboratory with nationwide support.
Installation & Training
Installation, commissioning and operator training available.
After Sales Support
Technical support, servicing, repairs and ongoing customer care.