MQS are the authorised service centres for Tesa Height Gauges in the UK
In the tradition of the 1D control panel, your POWER PANEL plus M provides
exceptional ease of use. Based on the concept One Key = One Function, it allows a
direct and easy access to the variety of measuring and analytical functions available.
The measured values are displayed along with a number of icons enabling a clear
interpretation of the results.
Besides 1D measurement, your POWER PANEL plus M has the following additional
features and functions:
Possible use of two references A and B.
-
Possible connection of an RS type instrument.
-
Angle measurement.
-
-
Perpendicularity measurement using either a measuring instrument equipped with
an RS 232 output or a TESA IG -13 digital probe. Whenever two measuring
instruments are connected simultaneously, the culmination point will be
automatically detected with the digital probe coming first.
2D measurement with graphical representation of the coordinate axes available
on display along with the measured part features.
Creation of a part programme by learning.
Automatic edition and generation of the measurement cycles. The memory can
accept up to 9999 part features distributed in several part programmes, each including as much as 999 values.
Memory capacity for 25.000 measured values.
SPC capabilities with output of the average, range, standard deviation, histogram,
actual/effective value comparison, number of out-of-tolerances values, control
limits and control charts.
Temperature compensation.
Possible output of reports with all measurement and statistical data in A4 format.
Two models available (with or without built-in pri nter).
Connectors on the back panel:
Column: SUB-D connector, 15-pin female
RS output: SUB-D connector, 9-pin female
RS input: SUB-D connector, 9-pin male
TESA IG-13: MINI-DIN input
Printer: CENTRONICS output, 25-pin
Power input for the foot switch
Power input for the battery charger whenever the control-panel is used
with TESA-µHite
